Embroidery for Beginners: What You Actually Need
Hand embroidery does not call for an elaborate collection of tools. A carefully chosen handful of supplies is enough to get started, and if you already enjoy cross stitch, you may have several of them to hand. In this guide to embroidery for beginners, we walk you through the essentials: choosing fabric and a hoop, selecting floss and needles, transferring a design, and preparing your first piece. We’ll also point out what a beginner can safely leave until later.
This guide covers hand embroidery only. Machine embroidery requires a different set of equipment and materials.
What do I need to start hand embroidery?
For a first project, this is the essential supply list. You can add specialist tools as your work develops, but none of them is necessary at the outset.
- Fabric: plain-weave cotton or linen without stretch.
- A hoop: 5 to 7 inches (13 to 18 cm) is a practical size for most first projects.
- Embroidery floss: six-strand cotton embroidery floss.
- Embroidery needles: sharp needles with a long eye.
- Small, sharp scissors: for trimming thread neatly and close to the fabric.
- A way to transfer the design: an erasable marking pen, a tracing method, or pre-printed fabric.
We’ll go through each item in more detail below, including what to look for and which choices are easiest to work with.
Which fabric should I use for hand embroidery?
Choose a stable, closely woven fabric with no stretch. Press it before you begin, then cut it at least 2 inches (5 cm) wider than the hoop on every side. That extra allowance gives you enough fabric to hold comfortably and adjust the tension. The points below will help you choose a suitable cloth.
What is the best fabric for embroidery?
For general hand embroidery, we recommend a medium-weight cotton or linen with a close, even weave. Quilting cotton, muslin and calico are affordable, dependable choices for practice. Linen and cotton-linen blends are traditional favorites: the surface is pleasant to stitch on, the needle passes through cleanly, and well-formed stitches sit beautifully on the fabric. Their natural fibers also respond well to hoop tension.
For a first project, leave stretchy knits, very open weaves and sheer fabrics for later. They can shift or distort in the hoop, making it harder to keep your stitches even. When you are ready to embroider garments such as T-shirts or denim, use an appropriate stabilizer on the reverse.
If you would like to work on linen, Zweigart is a lovely option to consider. These are counted-thread linens commonly used for cross stitch, so they are a more specialized and more expensive choice than plain cotton. We would treat them as an upgrade once you are comfortable with your basic materials.
Our pickZweigart Cashel Linen, 28 countAntique white, precut 19x27 inOur pick: the same 14 stitches per inch as 14-count Aida, but on linen.
Zweigart Belfast Linen, 32 countSoft ivory, precut 19x27 inWorked over two threads, 32 count gives 16 stitches per inch.
Which fabrics can be used in an embroidery hoop?
Most woven fabrics can be held in a hoop, provided they fit comfortably and can be tensioned without stretching out of shape. Cotton, linen, evenweave and Aida are all suitable for different kinds of needlework. Keep these practical points in mind:
- Stretchy or slippery fabric needs a stabilizer on the reverse to prevent it from shifting or distorting.
- Thick, bulky fabric may be difficult to secure and can be marked by the hoop. Try a deeper or larger hoop, or use a frame.
- The fabric should be bigger than the hoop by at least 2 inches (5 cm) on every side.
What does fabric count mean? (11, 14, 22 count and more)
If you work in cross stitch, or are planning to try it, you will often see a fabric count printed on the label. Count tells you how many stitches, holes or fabric threads fit into one inch, depending on the fabric and technique. A higher count produces smaller stitches and finer detail, so the finished design is more compact. A lower count gives you larger, more visible stitches. The same chart will therefore produce different finished dimensions on different counts:
| Fabric count | Stitches per inch | A design 100 stitches wide measures |
|---|---|---|
| 11 count | 11 | about 9.1 in (23 cm) |
| 14 count | 14 | about 7.1 in (18 cm) |
| 16 count | 16 | about 6.3 in (16 cm) |
| 18 count | 18 | about 5.6 in (14 cm) |
| 22 count | 22 | about 4.5 in (11.5 cm) |
What does 22 count mean?
On 22-count fabric, 22 stitches fit into one inch—twice as many as on 11-count fabric. The same chart will therefore finish at roughly half the width and height. Hardanger and fine evenweaves can produce beautifully crisp detail at this count, but the stitches are small and require good light and comfortable eyesight. Most beginners find 14-count Aida a more manageable starting point.
On linen and evenweave, the count is measured in threads per inch. Cross stitches are generally worked over two fabric threads, which means 28-count linen gives 14 stitches per inch, while 32-count linen gives 16.
Is my cross stitch 11 or 14 count?
The fabric label or kit instructions are the most reliable place to check. If neither is available, you can measure the fabric yourself:
- Lay a ruler along the fabric, following a row of holes.
- Count the holes across 1 inch (2.5 cm). For a more reliable result, measure across 2 inches and divide the number by two.
- Count holes, not threads. If you count about 14, it is 14 count. About 11 means 11 count.
You can also compare the fabric visually: 11-count Aida has larger, more open holes; 14-count is a common all-purpose size; and 18-count has a noticeably finer grid.
What is the easiest count?
For most beginners, 14-count Aida is the easiest all-round choice. Its holes are clear and easy to work into, and it is widely used in kits. 11-count is even more comfortable to see and works up quickly, although the finished design will be larger. Once you are confident with your stitches, try 16 or 18 count. We would leave 22 count until you have more experience.
Our pickZweigart Aida, 14 countWhite, precut 19x21 inOur pick: the easiest all-round choice for most beginners.
Zweigart Aida, 16 countAntique white, precut 19x21 inA good next step once your stitches feel confident.
Zweigart Aida, 20 countSnow glitter, precut 19x21 inThe finest of the four, with a glitter finish.
Embroidery or cross stitch: which is easier for a beginner?
For most beginners, cross stitch is the easier place to start, because the fabric grid shows where every stitch goes. That said, neither technique is inherently better; they simply offer different ways of working. Cross stitch on Aida is often the more structured introduction: the fabric grid guides every stitch, the basic cross is easy to learn, and you follow a chart. Freehand embroidery offers greater freedom of line, texture and stitch choice, but you will need to transfer a design and become familiar with several stitches. If you enjoy precise, counted work, begin with cross stitch. If you are drawn to expressive lines and varied textures, try hand embroidery. The skills and many of the supplies overlap, so it is quite natural to enjoy both.
What size embroidery hoop should I choose: wood or plastic?
A hoop keeps the fabric evenly tensioned while you stitch. Think of a drum skin: the cloth should feel firm and smooth, but never stretched out of shape. For a first project, choose a hoop slightly larger than the design itself. A diameter of 5 to 7 inches (13 to 18 cm) is comfortable to hold and usually means you will not need to reposition the fabric often.
Wooden or plastic hoops: which is better?
Both types can hold fabric securely. The better choice comes down to the feel, the project and how you plan to use the hoop:
| Wooden hoop | Plastic hoop | |
|---|---|---|
| Grip | The tightening screw allows you to adjust the tension precisely. A deeper wooden ring can also grip heavier fabric well. | A notch-and-groove fitting secures the fabric. Flexible Flexi hoops can also be used as a neat display frame when the work is finished. |
| Weight | Generally heavier, with a firm, traditional feel. | Lightweight and often more comfortable to hold for long sessions. |
| Look | A traditional natural finish that also looks attractive when displaying finished work. | Available in a range of colors and shapes, including round, oval and square. |
| Price at Wizardi | About $9 to $13 for the sizes below. | About $8 to $12 for the sizes below. |
If you are unsure, try one of each and see which feels more comfortable in your hands. You can browse all our embroidery hoops, or look at wooden hoops, plastic hoops and square hoops.
WoodOur pickNurge Wooden Hoop, 5 in130 mm, 16 mm deepOur pick: a 5 in hoop sits in the 5 to 7 inch range we suggest for a first project.
PlasticNurge Plastic Square Hoop145 x 165 mm, several colorsPlastic with a notch-and-groove grip, in several colors.
FlexiNurge Round Flexi Hoop, 8 in20.5 cm, woodgrain finishA flexible ring that doubles as a display frame.
PlasticNurge Plastic Square Hoop, large250 x 280 mm (10 x 11 in)One of our most-bought hoops, with room for larger designs.
What is the most commonly used hoop size?
For a first hand-embroidery project, 5 to 7 inches (13 to 18 cm) is a dependable recommendation. It gives you enough working space for a small motif without becoming awkward to hold.
Our customer sales add a useful perspective. Over the past 12 months, the most frequently purchased hoops have included Nurge Flexi hoops around 7 to 9 inches and plastic square hoops, including the larger 10 x 11 inch size. Many of our customers work in cross stitch, where larger designs often need more room. For a small embroidery motif, start with 5 to 7 inches; for a larger design, choose a hoop that gives you comfortable access to the area you are stitching.
Can I embroider without using a hoop?
Yes. Experienced stitchers sometimes work in hand, particularly on small pieces or firm fabrics. The main challenge is maintaining consistent tension: the fabric can pucker, and repeated pulling may distort the weave. If a hoop is not comfortable for you, consider a stretcher or scroll frame, or a stand that supports the work. For most beginners, however, a hoop is the simplest and most affordable way to keep the fabric evenly tensioned. If you prefer to work with both hands free, take a look at our table stands and floor stands.
Which embroidery floss and needles should I buy?
Embroidery floss is commonly sold in skeins made up of six fine strands twisted together. You separate the strands and use the number required by your design. Choose 100% cotton, six-strand embroidery floss for a versatile starting point. If you already cross stitch, the floss in your existing collection is suitable for hand embroidery too.
How many strands of embroidery floss should I use?
Your pattern or kit instructions should take priority. When no strand count is specified, these are useful starting points for hand embroidery:
- 1 strand for fine details, such as small lettering and delicate features.
- 2 or 3 strands for most outlines and general stitching.
- 4 to 6 strands for heavier lines, textured details and dense areas of fill.
In cross stitch, the number of strands is usually chosen according to the fabric count. This table is a useful general guide:
| Fabric count | Strands for cross stitches |
|---|---|
| 11 count | 3 |
| 14 count | 2 |
| 16 count | 2 |
| 18 count | 1 or 2 |
| 22 count | 1 |
Backstitch outlines are commonly worked with a single strand. If your kit gives different instructions, follow those, as the recommended coverage can vary with the design and fabric.
How should I separate embroidery floss?
- Cut a length of floss, approximately 18 inches (45 cm) long.
- Hold the length between your thumb and forefinger.
- Pinch one strand and ease it upwards, allowing the remaining strands to gather naturally. This bunching is normal.
- Smooth the remaining strands into place, then repeat until you have the number you need.
- Put the strands back together, keeping them flat and side by side, before threading your needle.
Separate the strands individually rather than pulling the whole bundle apart at once; this helps prevent tangling. Before stitching, lay the strands back together so they sit parallel. Your stitches will look smoother and more even.
Embroidery floss vs. thread: what is the difference?
Embroidery floss is soft, loosely twisted cotton made of six strands that you can split apart. Thread is a general term for many kinds of thread. Sewing thread, for example, is a strong, tightly twisted strand designed for seams. The term also covers specialist embroidery threads such as perle cotton, which has a glossy twist and cannot be separated into strands, as well as wool and silk.
For most traditional hand embroidery and cross stitch, six-strand floss is the practical choice. Ordinary sewing thread is usually too fine and tightly twisted to provide good coverage, although it can be useful for very fine details or attaching beads.
Which needle should I use for embroidery?
For freehand embroidery, choose a sharp needle with an elongated eye, usually sold as an embroidery or crewel needle. A mixed-size pack is a sensible first purchase. Needle sizes work in reverse: the lower the number, the larger the needle. Match the needle to the fabric and the number of floss strands so the eye can accommodate the thread without making an unnecessarily large hole. One important distinction for cross stitchers: the blunt tapestry needle used on Aida is not suitable for stitching freely through a closely woven fabric. Floss and embroidery needles are the two items in this list that we do not sell individually, so you will need to source them from a craft or needlework shop.
If you find it difficult to pass several strands of floss through the eye, a needle threader is a worthwhile little tool. It saves time and reduces frustration, especially when working with finer needles. Our selection includes ready-to-use threaders as well as kits you can stitch and assemble yourself.
Ready to useOur pickGolden Lotus Needle ThreaderWooden, with a metal hookOur pick: ready to use, with no assembly needed.
Ready to useSilver Pattern Needle ThreaderSilver acrylic, with a metal hook
Ready to useGolden Circle Needle ThreaderWooden, fleur-de-lis inlay
Ready to useSun Above the Clouds Needle ThreaderWooden, sun and swirl inlay
Make it yourselfFolk Tree Needle Threader KitStitch and assemble your own
Make it yourselfFolk Silhouette Needle Threader KitStitch and assemble your own
How do I transfer an embroidery design onto fabric?
There are four straightforward methods to choose from:
- Pre-printed fabric. The motif is printed directly onto the cloth, so no transfer is needed.
- Trace it. Secure the pattern and fabric against a bright window, then trace the design with a water- or air-erasable pen. Always test the pen on a fabric scrap first and follow the manufacturer's instructions for removing the marks.
- Transfer paper. Place transfer paper between the pattern and the fabric and trace over the design so the lines copy onto the fabric. For iron-on transfers, follow the instructions on the paper.
- Water-soluble stabilizer. A printable or sticky stabilizer holds the design on the surface while you stitch and dissolves in water when the work is complete.
Pre-printed fabric is a particularly convenient way to practice stitch tension because you can begin stitching straight away. Our stamped cross stitch kits come with the design already printed on the fabric, and the RTO kits below have a printed background.
StampedOur pickTulips Stamped Cross Stitch KitOrchidea 7517Our pick: the design is already printed on the fabric, so you can start stitching straight away.
StampedDaffodils Stamped Cross Stitch KitOrchidea 7513
Printed backgroundDance of Dragonflies KitRTO, printed background
Printed backgroundColourful Houses KitRTO, printed background
Printed backgroundHop-Corn Bunnies KitRTO, printed background
Printed backgroundDandy Lion Cub KitRTO, printed background
What other tools are useful, and what can I leave until later?
Useful additions:
- Good embroidery scissors. Small, sharp scissors are already on the essentials list. A dedicated pair makes it easier to trim thread close to the fabric without damaging the stitches.
- A needle minder. A magnetic needle minder gives your needle a safe place to rest between stitches, so it is less likely to get lost in your work or around your sewing area.
- A floss organizer. Keeping each color organized makes loose lengths easier to find and helps prevent tangles.
TrimOur pickSilver Leaf Embroidery ScissorsAntique silver finishOur pick: small, sharp scissors are on the essentials list.
Needle minderAvocado Magnetic Needle MinderMore in our needle minder collectionMagnetic, so your needle always has a safe place to rest.
OrganizerRound Floss OrganizerMore in our thread organizersKeeps each color apart to help prevent tangles.
Tool setCopper Embroidery Tool SetFive-piece set in a tinYour essential tools together in one tin. A lovely gift.
For more options, browse our scissors and stitching accessories. If you are choosing a gift for a stitcher, a matching embroidery tool set in a tin keeps the essential tools neatly together.
Items you can comfortably postpone:
- A stand. A stand leaves both hands free, but it is not essential: you can support a hoop in your lap or hold it as you work. Consider adding one once you know you will stitch regularly. When you are ready, take a look at the Nurge adjustable seat stand.
- A large floss collection. Start with the colors required for your first design. Build your palette gradually as new projects call for it.
- Several hoop sizes. A single, well-sized hoop is enough for your first few projects. Add another size when a particular design requires it.
Should I buy an embroidery kit or assemble my own supplies?
A kit is the most straightforward way to begin because the design, fabric and thread have already been selected to work together. Assembling your own materials takes a little more planning, but gives you control over the fabric, palette and hoop size. Either approach is perfectly sound. The basic tools in this guide will serve you well whichever route you choose.
Our kits focus on close relatives of freehand embroidery: cross stitch kits for beginners, stamped cross stitch, bead embroidery and needlepoint kits. Many of these crafts develop the same useful habits: following a pattern, maintaining even tension and taking care with the finishing.
I already do cross stitch. Which supplies and skills can I reuse?
Quite a lot. Cross stitch is a form of embroidery, so you will already have a feel for working with thread, fabric tension and a needle. Those habits provide a very good foundation.
What you can use again:
- Six-strand cotton floss
- Hoops and frames
- Scissors
- Needle minders and floss organizers
What is different:
- The needle: use a sharp, long-eyed embroidery needle rather than a blunt tapestry needle.
- The fabric: choose a plain, closely woven surface instead of a counted fabric such as Aida.
- The approach: rather than following a grid, you will usually stitch along a design transferred or drawn onto the fabric.
- A wider stitch vocabulary: backstitch, satin stitch and French knots become part of your repertoire alongside the familiar cross. Our guide to embroidery stitches is a useful place to begin exploring them.
For a refresher on counted work, take a look at where to start in cross stitch and our top 5 must-haves for every cross stitcher.
How much does it cost to start embroidery? Is it an inexpensive hobby?
Compared with many crafts, hand embroidery is relatively affordable. The essential supply list is short, and you may already own some of the basics. Below are the current prices at Wizardi for the tools featured in this guide (checked in November 2026; prices may change):
| Item | Our price |
|---|---|
| Wooden hoop, 7.5 in to wooden hoop, 5 in | $8.87 to $12.75 |
| Round Flexi hoop, 8 in | $8.30 |
| Plastic square hoop | $9.99 |
| Embroidery scissors | $16.29 |
| Needle threader | $9.88 |
| Magnetic needle minder | $7.64 |
| Floss organizer | $6.73 |
| Stamped cross stitch kit | $11.64 |
A hoop and a pair of scissors from our shop cost around $25. You will also need fabric, needles and floss, with the total depending on what you already own and where you shop. To keep the first project affordable, buy only the colors it requires and expand your collection as you take on new designs.
How should I set up my first embroidery project?
- Iron your fabric until it lies smooth and flat.
- Transfer your design using one of the methods described above.
- Hoop the fabric. If your hoop has a screw, loosen it. Separate the two rings, place the fabric over the inner ring and center the design, then press the outer ring into place. Tighten the screw (or close the lock) and gently ease the fabric until it is evenly taut, like a drum skin. Avoid pulling so firmly that the weave becomes distorted.
- Cut your floss to approximately 18 inches (45 cm), then separate the number of strands specified by your pattern.
- Thread the needle and start stitching. Backstitch is a good first choice for outlining a simple design; it is easy to control and produces a clear line.
- Finish neatly. Secure the thread on the reverse without bulky knots. If you are putting the project aside for a while, remove the fabric from the hoop to avoid leaving a lasting ring mark. Our article on a neat back side explains a few finishing principles that are useful here too. Once the piece is complete, see our advice on how to wash and iron it.
Is hand embroidery difficult to learn? Common beginner mistakes
Hand embroidery is approachable once you understand a few basic stitches. Consistent tension and neat finishing come with practice, not special talent. These are some common early mistakes, along with the adjustments that help:
- Loose fabric in the hoop. Check the screw or lock and gently bring the fabric back to an even, firm tension.
- Too many strands. Reduce the strand count until the stitches lie smoothly and suit the scale of the design.
- Thread that is too long. Long lengths are more likely to tangle, fray and wear as you pull them through the fabric. Aim for around 18 inches.
- Pulling stitches too tight. Excessive tension pulls the fabric out of shape. Let the thread settle into the fabric without forcing the stitch tight.
- Skipping the iron. Press the fabric before placing it in the hoop; creases are difficult to remove once the area is stitched.
- Starting with a very detailed design. Choose a small motif or a simple outline first. You can work up to more intricate designs as your control improves.
Quick answers to common embroidery questions
Can I use cross stitch floss for embroidery?
Yes. Cross stitch and hand embroidery both use six-strand cotton floss. For freehand work, pair it with a sharp embroidery needle and a suitable plain-weave fabric.
Which stitches should I learn first?
Begin with running stitch, backstitch, satin stitch and the French knot. These four techniques introduce useful lines, fills and texture found in many beginner designs. Our guide to embroidery stitches covers additional stitches and how they are worked.
How do I keep my floss from tangling?
Use shorter lengths, separate strands one at a time and keep each color on its own bobbin or in a thread organizer. Browse our thread organizers.
What should I try after my first project?
Once you have your hoop, needle, scissors and floss, choose a small design and concentrate on keeping your stitches even. As your confidence grows, you can explore more tools and techniques. Browse our hoops, stitching accessories, cross stitch kits for beginners and bead embroidery kits. And if you are shopping for someone else, our needlework accessory gift ideas are a good place to start.


